? north america tel: 800.366.2266 ? europe tel: +353.21.244.6400 ? india tel: +91.80.4155721 ? china tel: +86.21.2407.1588 visit www.macomtech.com for addi tional data sheets and product information. m/a-com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. 1 two-way power dividers, 1 - 100 mhz and 40 - 400 mhz rev. v3 MTH-50 / mtv-50 advanced: data sheets contain information regarding a product m/a-com technology solutions is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com technology solutions has under development. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. features ? ideal for high density packaging ? high isolation: 30 db min. ? vswr: 1.3:1 max. ? impedance: 50 ohms nominal ? maximum power rating or input power: 1 watt max. ? internal load dissipation: 0.05 watts max. ? mil-std-883 screening available description a power divider is ideally a lossless reciprocal device which can also perform vector summation of two or more signals and thus is sometimes called a power combiner or summer. to-5-1 pin configuration pin no. function pin no. function a out c out b in MTH-50 electrical specifications 1 : t a = -55c to +85c parameter test conditions frequency units min typ max frequency ? 1 - 100 mhz ? ? ? insertion loss less coupling 1 - 100 mhz db ? ? 0.5 isolation ? 1 - 100 mhz db 30 ? ? amplitude balance ? 1 - 100 mhz db ? ? 0.1 phase balance ? 1 - 100 mhz ? ? 1.0 vswr ? 1 - 100 mhz ratio ? ? 1.3:1 mtv-50 electrical specifications 1 : t a = -55c to +85c parameter test conditions frequency units min typ max frequency ? 40 - 400 mhz mhz ? ? ? insertion loss less coupling 40 - 400 mhz db ? ? 0.6 isolation ? 40 - 400 mhz db 30 ? ? amplitude balance ? 40 - 400 mhz db ? ? 0.2 phase balance ? 40 - 400 mhz ? ? 2.0 vswr ? 40 - 400 mhz ratio ? ? 1.3:1 1. all specification apply with 50 ohm source and load impedance.
? north america tel: 800.366.2266 ? europe tel: +353.21.244.6400 ? india tel: +91.80.4155721 ? china tel: +86.21.2407.1588 visit www.macomtech.com for addi tional data sheets and product information. m/a-com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. 2 two-way power dividers, 1 - 100 mhz and 40 - 400 mhz rev. v3 MTH-50 / mtv-50 advanced: data sheets contain information regarding a product m/a-com technology solutions is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com technology solutions has under development. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. typical performance curves isolation - ports 1 - 3 insertion loss - ports 2 - 3, 2 - 1 vswr ordering information part number package MTH-50 pin to-5-1 mtv-50 pin to-5-1 0.0 0.2 0.4 0.6 0.8 1. 0 1. 2 1. 4 0.5 1 2 5 10 20 50 100 200 300 400 500 600 f requency (m h z) insertion loss (db) MTH-50 mtv-50 10 20 30 40 50 60 70 80 0.5 1 2 5 10 20 50 100 200 300 400 500 600 f requency (m h z) isolation (db) MTH-50 mtv-50 1 1. 2 1. 4 1. 6 1. 8 2 2.2 2.4 2.6 2.8 0.5 1 2 5 10 20 50 100 200 300 400 500 600 f requency (m h z) vswr m th-50 input m tv-50 input m th-50 output m tv -50 output
|